Fulltext results:
- btrfs @linux:filesystems
- tadata usage. btrfs fi df /home/ see, if the device was full: btrfs filesystem show for example:... ize 3.51TiB used 3.28TiB path /dev/sdb4 if the device was full, reorder chunks - kind of defrag: btr... == btrfs RAID ===== **If you run a RAID1 and one device crashs, you have a problem! The device cannot be removed: Cannot go below the minimum number of raid dev
- Crypto @linux:filesystems
- /dev/sdY1 This creates a RAID 1. Choose a free device number for X in /dev/mdX The device will be created and synchronization of the blocks starts. Check the ... /etc/mdadm/mdadm.conf** cd /etc/mdadm echo 'DEVICE /dev/hd*[0-9] /dev/sd*[0-9]' >> mdadm.conf mdad... m --detail --scan >> mdadm.conf Comment original DEVICE line out ---- \\ **Encrypting the Block Devices
- S7edge @android_-_os
- om a sammobile stock firmware does not help - the device got stuck in a bootloop :-( After flashing the c... ystem with the stock firmware from 16.04.2016 the device boots again and all data is still there (dalvik c... default bootloader it is possible to re-root the device with the latest CF-autoroot :-D Make sure to dis
- Samsung Galaxy Note 9 @android_-_os
- s.org/devices/crownlte/install * ensure that the device is on the latest Android 10 firmware * After inst... our phone in Download / Odin mode (make sure your device is off) with the following button combo: USB... got with your phone. Odin should detect your device and a BLUE box will show up with the COM port num
- Cyanogenmod @android_-_os
- rnational LTE ==== * Download: http://get.cm/?device=jfltexx * Howtos: * http://wiki.cyanogenmo... ge * Download https://download.cyanogenmod.org/?device=hlte and gapps (arm) ==== Notes ==== * Backu... y-s4-all-models/ * http://samsung-updates.com/device/?id=GT-I9505 * install a new system and / or re
- Bootloader @linux:filesystems
- Generating grub configuration file ... WARNING: Device /dev/ram0 not initialized in udev database even a... v ===== Crypto Bugs ===== Grub complains root device couldn't be found Fix: - set GRUB_ENABLE_CR
- OpenWRT @communitycloud:freifunk
- nt option target /mnt/sd option device /dev/sdc2 option fstype ext4 ... option enabled_fsck 1 config swap option device /dev/sdc1 option enabled 1
- Crash Recovery @linux
- es not boot anymore, **you can open the encrypted device anyway with a live system** on USB stick or CD. ... ps://askubuntu.com/questions/567730/gave-up-waiting-for-root-device-ubuntu-vg-root-doesnt-exist#567897
- Firefox Sync @communitycloud:services
- so obvious: * always select "**i dont have the device near me**" to get a chance to enter your password... sword for the FIRST computer * you need to "add device" in **Edit-> Preferences-> Sync** and get your '*
- Multiboot Stick @linux:filesystems
- root (su / sudo -i) * attach usb stick * find device of the stick fdisk -l *replace sdX by the usbstick device you found in the next steps! * mount stick
- Lenovo X13 @linux:machines
- ents in fcc_unlock.c appropriately #define MBIM_DEVICE_PATH "/dev/wwan0p2MBIM" #define MBIM2SAR_SO_PAT
- Access Point - hostapd @linux:network
- **First test:** #change wlan0 to your wireless device interface=wlan0 driver=nl80211 ssid=test
- Filesystems @linux
- controller [0106]: Marvell Technology Group Ltd. Device [1b4b:9125] (rev 11) Associate ID with the AHCI
- Crypto @android_-_os
- v/mapper/sdhome Old android: On a Android 4.0 device i used these settings, because the kernel does no
- Mi Band 4 @android_-_os
- 6efb602ad58981e19180dc953866 "select AUTHKEY from DEVICE" * long press the band title when paring to en
