Fulltext results:
- LXC @linux:virtualization
- its overwritten! - set static ips:** first set mcedit as default editor in /root/.bashrc: export EDITOR='mcedit' virsh net-edit default <network> <name>default</name> <uuid>a07016bb-2e96-2000-9e16-b93b... 4::2' prefix='64'> </ip> </network> **edit VS config, add:** lxc.network.type = veth lxc
- PHP @linux:webserver
- c/apache2/mods-enabled/fastcgi.conf.backup mcedit /etc/apache2/mods-enabled/fastcgi.conf <IfMo... pfpm "www" pool process is running You need to edit your vhosts to use the new pool. Replace USERNAME... uld~ be compatible ==== PHP7.0-FPM Config: ==== edit or copy configs from php5: * /etc/php/7.0/fpm/
- Access Point - hostapd @linux:network
- d dnsmasq rcconf ===== Configure hostapd ===== Edit **/etc/hostapd/hostapd.conf** **First test:** ... =CCMP ===== Configure network interfaces ===== Edit **/etc/network/interfaces**: auto lo # conf... ed, because it is easier to configure than dhcpd Edit **/etc/dnsmasq.conf** and add: # disables dnsm
- Formatting Syntax @wiki
- ve a look at the source of this page by pressing "Edit this page". If you want to try something, just us... t unicon upc urbi uscript vala vbnet vb vbscript vedit verilog vhdl vim visualfoxpro visualprolog whites
- Videoconference - Jitsi Meet @communitycloud:services
- ings and change some Settings in Jitsi Config: mcedit /etc/jitsi/videobridge/sip-communicator.propertie... Hack to Change Welcome Screen Messages ===== mcedit /usr/share/jitsi-meet/css/all.css .welcome .h
- BananaPi M3 @linux:machines
- 7-13/2009 === Fix HDMI to DVI Adapter === Just edit /boot/bananapi/bpi-m3/linux uEnv.txt file or use... solution/1442 === Change HDMI resolution === **Edit /boot/bananapi/bpi-m3/linux uEnv.txt**: There are
- Monitoring @communitycloud:services
- the same hostname as setup in munin.conf. If not, edit munin-node.conf host_name on client telnet <ip... -R 4949:localhost:4950 -p22 root@10.23.0.2 \\ edit **/etc/munin/munin.conf** to access the node on l
- Multiboot Stick @linux:filesystems
- no-floppy --root-directory=/mnt/usb /dev/sdX * edit grub.cfg config to match your iso files - edit /mnt/usb/boot/grub/grub.cfg * example grub.cgf:
- Etherpad Live Editor @communitycloud:services
- etherpad'@'localhost' WITH GRANT OPTION ; * **Edit settings.json** in your Etherpad Lite root folder... nd Exporting === aptitude install abiword **Edit settings.json to point to abiword:** "abiword"
- OpenWRT @communitycloud:freifunk
- .bashrc ==== opkg update opkg install bash edit **/etc/passwd** and replace **/bin/ash** for **/b... k-hotplug will take care of boot and automount. edit config in /etc/config/fstab - example with swap a
- Graphics Driver @linux:system_config
- vers are uninstalled and **blacklist them**: mcedit /etc/modprobe.d/blacklist-nouveau.conf blac
- Synergy @linux:network
- t synergy in 'PreSession' before the login. mcedit /etc/gdm/PostLogin/Default If the file doesn't
- SSH @linux:network
- xed with the Path defined in authorized_keys mcedit /root/.ssh/authorized_keys # prefix key with so
- Crash Recovery @linux
- ing module to initramfs - inside the chroot: mcedit /etc/initramfs-tools/modules Write one module n
- open.wiki
- \\ {{:alt-f4.gif |}} ~~CLOUD~~ **you can edit and share $any content you like! - just contact u