….
Installation:
Reset:
turn on, wait for blinking SYS LED, press and hold QSS button until SYS blinks fast
use 'mtd' if its bricked by DD-WRT:
1. Connect the router to a pc with an installed webserver providing the orig fw.
2. Reset to defaults may be useful.
3. ssh to your router
4. cd /tmp
5. wget http://yourpcwithwebserver/tp-link-wr1043nd-xxxxxx.bin
Attention! some firmwares containing "boot" in the name need modification - see scroogle!
6. flash it via mtd:
mtd -e linux -r write tp-link-wr1043nd-xxxxxx.bin linux
7. Take a nap or do something else.
Be extra careful and read the mtd manual and the openwrt wiki for wr1043nd.
- confirmed by snu 7.11.11